Toll Free: 1-800-969-9215

  • Get A Quote Now Dealer Login Create a dealer's account

Spa Covers

Spa Cover imageWe use the best quality marine grade vinyl, which is UV treated to resist fading, cracking and mildew. Our cover skins are computer cut to ensure a perfect fit, while the remainder of the hot tub cover is hand made with top quality workmanship. PSP spa covers are perfect for any custom spa and are available in 12 beautiful colors.

3-Year Warranty

We offer a variety of tapers, skirt sizes and colors to give you more selection to best suit your needs.

Features of our Spa covers.
Made of high quality UV and mildew inhibitors marine grade vinyl with:

  • 1.5 lb., 2 lb. density foam
  • 2 inch aluminum C channel
  • Vapour barrier protection
  • Drainage
  • Locking straps
  • Reflective shield undersides
  • ASTM safety compliance

Skirt – Our standard skirt size is 2.5 inch. As per your acrylic size we manufacture skirts with a longer size and you can also have the option of no skirt. We also offer inserts with higher density.

12 colours to choose from

Please provide the following measurements. Be accurate and clear when ordering.
– Measuring a Round Corner Radius
– Measuring a Cut Corner & Octagon Covers

Squares / Rectangle

A=___ B=___

Squares / Rectangles (With Radius Corner)

A=___ B=___ C=___
Click to measure radius corner

Round

A (diameter)=___

Octagon

A=___ B=___
For octagons all sides are equal

Hexagon

A=___ B=___ C=___ D=___

Stretched Octagon (Four Cut Corners)

A =____ B =___ C =___ D =___ E =___

One Cut Corner

A =____ B =___ C =___ D =___ E =___
f (if radius corner)=____
Click to measure radius corner

Two Cut Corner>

A=___ B=___ C=___ D=___ E=___

make sure two cut corners are equal

Each spa cover is custom made to your specifications. We will be happy to assist you in determining your cover size and style.

1 (1)

Method 1:
Some covers have rounded corners. To measure the radius of these curves extend two imaginary lines to meet at a point from the start of the curve. The length of this imaginary line (red line) represents the radius of the curve. The lines start where the cover begins to curve, and ends where they cross.

Method 2:
If you have an old cover, put the cover on the top of a newspaper and align the two edges of the cover with the edge of newspaper. The distance from the corner of the newspaper, to where the cover completely covers the paper is the radius of the corner.

Method 3:
Trace the outside edge of the rounded corner on a piece paper. Then FAX it to us at 705-797-1380

Note: Measure all radius corners. Make sure that all the radii are equal. A slight difference in each radius will hang the spa or will not cover the spa completely.

Some covers have cut-corners as shown in the diagram above. You can simply measure the cut corner using a tape provided the two ends of the cut corner are not rounded.
It is difficult to measure a cut-corner when the corner is also rounded. In order to do this, use masking tape, to extend the lines of your spa (or existing cover) as shown below. The line where the tape crosses is measure of the cut corner. In the diagram below, “A” is the measurement of the cut-corner.

Note:
Be sure to measure all corners as some covers have different cuts.
IMPORTANT: A smaller cut-corner will cause the cover to slightly over hang the spa while a larger cut will not cover the spa completely.


When measuring an octagon spa, it is important to measure all sides of the tub. If all sides are equal, they are regular octagon, if not they are stretch octagons (rectangles with 4 cut corners). For a stretch octagon measure the total height and width as they may not be equal.

We offer a variety of tapers, skirt sizes and colors to give you more selection to best suit your needs.

Features of our Spa covers.
Made of high quality UV and mildew inhibitors marine grade vinyl with:

  • 1.5 lb., 2 lb. density foam
  • 2 inch aluminum C channel
  • Vapour barrier protection
  • Drainage
  • Locking straps
  • Reflective shield undersides
  • ASTM safety compliance

Skirt – Our standard skirt size is 2.5 inch. As per your acrylic size we manufacture skirts with a longer size and you can also have the option of no skirt. We also offer inserts with higher density.

Black

Black

Blue

Blue

Brown

Brown

Burgundy

Burgundy

Chocolate

Chocolate

Charcoal

Charcoal

Chestnut

Chestnut

Dark Grey

Dark-Grey

Forest Green

Forest-Green

Tan

Tan

Teal

Teal

Tropical Blue

Tropical-Blue
Skin We use the best quality marine grade vinyl, which is UV treated to resist fading, cracking and mildew.
Aluminum reinforcement
channel
Tempered aluminum center c-channel supports and high strength insulating foam, allow our spa covers to handle heavy snow loads without bending.
Nylon zipper Heavy-duty zipper is expertly sewn in, allowing for easy access to foam insert.
Form insert All inserts are vacuum-heat sealed in 4-mil poly for extra protection against moisture’s.
Super reinforced
hinge seal
The double reinforced hinge on all our covers helps seal effectively to avoid moisture loss and conserve energy.
Locking Strap Lock-down straps that clip in place to prevent from wind blowing your hot tub cover off and plastic locks with keys give added security from children getting into your spa.
Skirt The skirt is meticulously sewn from TWO layers of vinyl, and comes in a standard length of 2.5″. Can be made longer if needed or we can make with no skirt.
Tapering Tapered hot tub covers are recommended for outdoors to help with snow and rain flow-off while flat covers suite best for indoors.
Handles Reinforced cross-stitched handles helps to lift covers easily.

3 YEAR LIMITED WARRANTY

PSP FABRICATING INC. Warrants the purchaser of the spa cover that any defects in material or workmanship will be repaired or replaced, at the company’s discretion, free of charge within one (1) year of the purchase date.

  • 2nd. year replacement charge 50% of the purchase price.
  • 3rd. year replacement charge 80% of the purchase price.

Should you discover a defect, as covered by this limited warranty, during the warranty period:

PSP Fabricating will repair or replace, at its discretion, any defects, if upon inspection the defect is found to be covered by the warranty.
The repaired or replaced cover will be shipped pre-paid by a conventional surface freight carrier.

The following are excluded from the warranty:

Foam breakage and/or torn vinyl. Foam breakage or deterioration and/or torn vinyl from excessive weight caused by rain, water, snow, excessive heat, animals, and/or humans
Chaffing, scuffing, and/or or worn holes in cover from dragging or storing it against sharp objects.
Cost of freight to PSP fabricating manufacturing facility.
Fading of vinyl and thread: This is not considered a defect, but a naturally occurring circumstance due to normal chemical maintenance, exposure to the sun, and aging of the cover.
Torn handles: handles are for opening and closing the cover only. They are not designed to carry the cover

For service under this warranty, or any information about our spa covers, call your dealer, or contact us at:

PSP FABRICATING INC.
11 MORROW ROAD
BARRIE, ON,
L4N 3V7

IN ORDER TO COMPLETE YOUR WARRANTY REGISTRATION FORM.

PLEASE HAVE YOUR SALE RECEIPT READY!